10G 1550nm SFP+-ER Fiber Optic Transceiver 40km With Digital Diagnostic Functions

FA-TCS10L15-40D,10G 1550nm SFP+-ER Fiber Optic Transceiver 40km With Digital Diagnostic Functions

The development of artificial intelligence, the Internet of things has brought new challenges to data center expansion, technology and cost often collide with sparks , when we want to achieve high density and high capacity we also need to control the cost at the same time, so the reasonable cabling is very important, when we do the cabling, we can choose the high speed cable and fiber patch cord with optical transceiver.

The traditional wiring architecture, which we call EOR and MOR, takes centralized cabling. While the TOR structure adopts point-to-point wiring way, reduce the number of wiring, save cost in a certain extent, in the design of a TOR structure, each rack placed at least a switch, server inside the rack usually connected by copper, the top switch is connected to each other in each frame.

Taking the 10G data center as an example, in the current popular ridge topology, the TOR switch is a leaf switch, which is connected to the backbone switch. For example, in a 10G network, the 10G server is connected to the 10G switch through 10G SFP+DAC and Cat6a/Cat7 and 10G fiber optic transceiver. 10G switch is used as a leaf switch to connect to the main switch of 40G.

10G SFP+DAC is a copper cable with SFP+ connector at both ends , compared to 10G optical transceiver, it is with lower cost; the use of 10G SFP+DAC makes the cabling more flexible, the transmission distance can reach 10 meters, and it is with lower difficulty in actual construction process; 10G SFP+DAC also saves wiring connection device, do not need to use the frame, servers and network devices and can be directly connected to the TOR switch, so it saves cost indirect .

Cabling of rack server and the rack switch, the vertical distance between these two can not exceed the cabinet, and can be connected with the 10G SFP+DAC at the same time. When the TOR switch is connected to the network switch, if the distance is greater than 15M, it should use multi-mode optical fiber and MM fiber optic transceiver. OM3/OM4 LC optical fiber jumper and 10G SFP+ optical transceiver are usually used. That is to say, the 10G SFP+ fiber optic transceiver is more widely used in long distance transmission.

Product Parameters Of SFP+ Optical Transceiver

Fiberall Technology (Shenzhen) Co., Ltd was started in 2007 and we are located in Shenzhen China. As a company engaged in fiber optical engineering related products, our main business including: research and development (R&D), manufacturing, marketing; optical engineering solution design; maintenance, consulting service and accessories outsourcing.

Our main products are: All kinds of Fiber PLC Splitters, FBT Couplers, Fiber Cable Assemblies, Patch Cords, Fiber Pigtails, Fiber Adapters, Patch Panels, Fiber Optical Transceivers, OLT (Optical Line Terminal), ONU (Optical Network Unit), FTTx, Equipments & Accessories for Fiber Test, Installation, Maintenance & Repair.

With eight years’ experience in fiber optic, Fiberall established a relatively perfect products and service system, with rich industry experience, comprehensive technology and high-quality team, we are able to provide our customers with OEM & ODM service, project implementation, maintenance, and after-sale service and we have ability to meet different requirement from different customers like distributors, operators, contractors and users etc.

Adhering to the core values of “Honesty, Responsibility, Efficiency, Flexibility, Communication, Mutual Benefit”, and with trust from all old & new customers, support from all partners and effort of our whole team, Fiberall gradually formed a business model of "service to project, based on the market, integrate design, production, marketing and service together", we are committed to providing a full range, high technology, low cost, and ultra expected solution to our customers.