10Gb/s XFP SFP Transceiver Module Hot Pluggable Duplex LC +3.3V 1310nm DFB/PIN

NDXP-10G-LR inter-converting the 10Gb/s serial electrical data stream with the 10Gb/s optical signal, complies with the current XFP Multi-Source Agreement (MSA) Specification, 10GBASE-LR/LW per IEEE 802.3ae and 10G Fibre Channel 1200-SM-LL-L. It provides Digital diagnostics functions via a 2-wire serial interface. The high-performance 1310nm DFB transmitter and high-sensitivity PIN receiver provide superior performance for Ethernet applications up to link length of 10km on single mode fiber.

Features:

• Supports 9.95 to 11.3Gb/s bit rates
• Hot pluggable 30 pin connector
• Duplex LC connector
• 1310nm DFB transmitter, PIN photo-detector
• SMF links up to 10km
• 2-wire interface for management and diagnostic monitor
• Compliant with XFP MSA
• XFI electrical interface with AC coupling
• Single power supply voltages : +3.3V
• Power dissipation: <1.5W
• Commercial Temperature Range: 0~ 70°C
• Industrial Temperature Range: -40~ +85°C
• RoHS Compliant Part

Applications:

• 10GBASE-LR/LW Ethernet
• SONET OC-192 /SDH
• 1200-SM-LL-L 10G Fibre Channel
• Other optical links

Ordering Information:

Absolute Maximum Ratings

Notes: 1. After internal AC coupling.

2. 20 – 80 %

3.Loss of Signal is open collector to be pulled up with a 4.7k – 10kohm resistor to 3.15 – 3.6V. Logic 0 indicates normal operation; logic 1 indicates no signal detected.

• Per Section 2.7.1. in the XFP MSA Specification.

• Optical Parameters (T_OP = 0 to 70°C)