| Sign In | Join Free | My xpshou.com |
|
| Sign In | Join Free | My xpshou.com |
|
| Categories | Fiber Optic Transceiver |
|---|---|
| Brand Name: | Fibery |
| Model Number: | QSFP-40G-SR4 |
| Certification: | ISO9001 |
| Place of Origin: | China |
| MOQ: | 1Pcs |
| Price: | Negotiable |
| Payment Terms: | T/T, L/C, Western Union, MoneyGram,Paypal |
| Supply Ability: | 5000Unit/Month |
| Delivery Time: | 3-6 work days |
| Packaging Details: | pvc box+outer carton |
| Product name: | 40G QSFP Transceiver |
| Wavelength: | 850nm |
| Distance: | 100m |
| Data rate: | 40Gb/s |
| Interface: | Single MPO connector |
| Power supply: | Single +3.3V |
| Warranty: | 3 Years |
| Application: | Ethernet,Fiber Channel,Switch to Switch interface |
40G QSFP PSM LR4 is a parallel 40Gb/s Quad Small Form-factor Pluggable (QSFP+) optical module. Itprovides increased port density and total system cost savings. The QSFP+ full-duplex optical module offers 4 independent transmit and receive channels, each capable of 10Gb/s operation for an aggregate data rate of 40Gb/s on 10km of single mode fiber.
An optical fiber ribbon cable with an MTP/MPO connector can be plugged into the QSFP+ module receptacle. Proper alignment is ensured by the guide pins inside the receptacle. The cable usually cannot be twisted for proper channel to channel alignment. Electrical connection is achieved through a z-pluggable 38-pin connector per MSA requirement.
Features
Parameter
| Package (Form Factor) | QSFP+ |
| Data Rate (typical) | 10.3 Gbps/CH |
| Centre Wavelength | 850nm |
| Distance | 100m on OM3 MMF |
| Diagnostics | Digital Monitor |
| Transmitter | 4CH VCSEL Array Laser |
| Receiver | 4CH PIN photo detector Array |
| TX Output Power (dBm) | -7.5~+2.5 |
| RX Sensitivity (dBm) | -9.5 |
| Low/High Case Temperature | 0°C~70°C |
| Voltage Supply (typical) | 3.3v |
| Connector | MTP/MPO 8F MMF Without PI |
| Parameter | Symbol | Min | Typical | Max | Unit | Notes | |
| Transmitter | |||||||
| Center Wavelength | λC | 1270 | 1310 | 1350 | nm | 1 | |
| RMS Spectral Width | λrms | 3.5 | nm | 1 | |||
| Average Launch Power, each lane | PAVG | -5.5 | -0.5 | +2.3 | dBm | ||
| Optical Modulation Amplitude (OMA) | POMA | -4.5 | -0.5 | +3.5 | dBm | 1 | |
| Difference in Launch Power between any two lanes | Ptx,diff | 5.0 | dB | ||||
| Launch Power in OMA minus Transmitter and Dispersion Penalty (TDP), each Lane | OMA-TDP | -9.7 | dBm | 1 | |||
| Rise/Fall Time | Tr/Tf | 50 | ps | ||||
| Extinction Ratio | ER | 3.5 | dB | ||||
| Relative Intensity Noise | Rin | -128 | dB/Hz | ||||
| Optical Return Loss Tolerance | TOL | 12 | dB | ||||
| Transmitter Reflectance | RT | -12 | dB | ||||
| Transmitter Eye Mask Margin | EMM | 10 | % | 2 | |||
| Transmitter Eye Mask Definition {X1, X2, X3, Y1, Y2, Y3} | {0.25, 0.4, 0.45, 0.25, 0.28, 0.4} | ||||||
| Average Launch Power OFF Transmitter, each Lane | Poff | -30 | dBm | ||||
| Receiver | |||||||
| Center Wavelength | λC | 1270 | 1310 | 1350 | nm | ||
| Damage Threshold | THd | +3 | dBm | ||||
| Overload, each lane | OVL | +1 | dBm | ||||
| Receiver Sensitivity in OMA, each Lane | SEN | -12.5 | dBm | ||||
| Difference in Receive Power between any two Lanes (OMA) | Prx,diff | 5.0 | dB | ||||
| Signal Loss Assert Threshold | LOSA | -30 | dBm | ||||
| Signal Loss Deassert Threshold | LOSD | -15 | dBm | ||||
| LOS Hysteresis | LOSH | 0.5 | 6 | dB | |||
| Optical Return Loss | ORL | -12 | dBm | ||||
| Receive Electrical 3 dB upper CutoffFrequency, each Lane | Fc | 12 | GHz | ||||
Notes:
1. Transmitter wavelength, RMS spectral width and power need to meet the OMA minus TDP specs to guarantee link performance.
2. The eye diagram is tested with 1000 waveform.
Order Information
| Part Number | Product Description |
| QSFP-SR4 | 850nm, 40G, 150m, 0ºC ~ +70ºC |
| QSFP-CSR4 | 850nm, 40G, 400m, 0ºC ~ +70ºC |
| QSFP-LR4 | 1310nm, 40G, 10km, 0ºC ~ +70ºC |
| 10GQSFP-CA-1M | 10G, copper with 1M optical cable |
Product Pictures
FAQ
Q1. Can I have a sample order for this product?
A: Yes, we welcome sample order to test and check quality. Mixed
samples are acceptable.
Q2. What about the lead time?
A:Sample needs 3-6 days, mass production time needs 1-2 weeks for
order quantity more than
Q3. Do you have any MOQ limit for sample order?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5
days to arrive. Airline and sea shipping are also optional.
|
10G SFP+ Active Optical Cable , Huawei Cisco AOC Cables SFP-10G-AOC1M
155M Bidi Singlemode Wdm SFP Module , 1310nm 1550nm Sc 20Km Sfp Lc Transceiver
Bidirectional Fiber Optic Transceiver 1.25G Lc Connector 20Km Single Fiber Sfp Module
300M 850Nm 10G SFP+ Transceiver , Dual Multimode Fiber Transceiver Sfp-10G-Sr
1.25G Sfp Modules 1310nm Dual Fiber Optic Transceiver Compatible With Cisco Huawei HP
high performance SFP Fiber Optic Transceiver 1.25G CWDM 40KM 1270nm~1610nm
10G CWDM SFP+ Fiber Transceiver , 1550nm 80km Sfp+ Optical Transceiver Single 3.3V
RoHS Compliant Fiber Optic Transceiver 10GE SR 850nm 550m Xfp Module XFP-10G-SR
40G QSFP Transceiver QSFP 40G LR4 , 1310NM 10KM Dual LC Sfp Transceiver
Small Sfp Fiber Optic Transceiver Module 10G Bidi 20KM For Cisco Huawei Switch
