3 Inch 2.5 Inch Stainless Steel Coil Springs Retainer 316 Ss Compression Springs

Stainless Steel Compression Spring Clips Retainer For Appliance

FAQ

Q: How long will a spring last?

---A correctly designed spring, without any extraordinary stress will last indefinitely.

Designing a spring based on its operating environment is necessary to increase the life of the spring.

If the spring is in corrosive environment, or under extreme temperatures, the proper material must be used in the design of the spring.

Using s stainless steel material, or putting a protective finish on the spring according to the elements

involved will increase the life cycle of the spring.

Q: How do I know if a spring is left hand or right hand wound?

---The best way to determine the direction of the spring is to use your right index finger and lay it over the spring.

If the end of the spring starts at the tip of your right index finger and proceed to wrap towards your palm,

this is considered a right hand wound spring.

On the contrary, a left hand wound spring would start at the tip of your left index finger and wrap towards your left palm.

Q: What is the proper deflection of a spring?

---Deflection refers to the distance a compression spring is compressed, the distance an extension spring in extended,

and the distance a torsion spring is rotated. Every spring is designed with a certain amount of sage deflection.

If a compression spring is compressed more than its safe deflection the spring will begin to take a set, and

not to come back to its original height. If an extension spring is extended beyond its safe deflection the spring will

begin to increase in length as it is returned to its original position. The same is the case with a torsion spring,

if it is wound beyond its safe deflection it will take a set and not unwind to its original starting position.