iec60320 1 lateral pull test apparatus

...o verify if the contact of connectors and appliance outlets have sufficient mechanical strength. A lateral pull force in parallel with the engagement face, is applied to the cable of the connector / plug connector in four directions in step of 90°±5°, a

...Lateral Pulling Test Apparatus To Pull Test For Testing Ratings Over 0.2 A Equipment overview: Th coupler lateral pulling test apparatus is manfactured according to the IEC60320-1 clause 23.3 and figure 19. It is used to test the connector being pulled out of the appliance socket under lateral stress, so as to assess the mechanical strength of the coupler. Test...

...Lateral Pulling Testing Apparatus Product Information: This device is according to the IEC60320-1, figure 19 standard requirement to design. It is used for the testing of withdrawing appliance inlet under the conditions of the connector with force, for this reason to test the mechanical strength of the connector. Technical Parameters: 1, Flexible cable bending height: 40±2 mm, adjustable. 2, Pull range: 0-100N. 3, Pull...

...Lateral Pulling Testing Apparatus Product Information: This device is according to the IEC60320-1, figure 19 standard requirement to design. It is used for the testing of withdrawing appliance inlet under the conditions of the connector with force, for this reason to test the mechanical strength of the connector. Technical Parameters: 1, Flexible cable bending height: 40±2 mm, adjustable. 2, Pull range: 0-100N. 3, Pull...

...Zipper Reciprocating Fatigue Testing Machine Life Testing Apparatus Application : This machine applies to test the reciprocating pulling strength of zipper in vertical and lateral tension, when doing testing, the machine is pulling the zip slider by ...